| 詳細內容： |
PoCL/Mini CL 黑白逐行掃描相機I
KP-F500PCL/SCL, KP-F230PCL/SCL, KP-F31PCL/SCL, KP-FB30PCL/SCL
品牌：日立（HITACHI)
主要特點
Mini CL （迷你CameraLink）
采用CameraLink接口，可以實現圖像數據的高速傳輸。同時MiniCameraLink接口的使用，使得相機的外型變得更加小巧。
PoCL (供電型CameraLink)
采用供電型CameraLink接口，可使電源供給、圖像數據傳送、相機控制通過一條CameraLink連線與圖像采集卡相連接，使得構建應用系統更簡單。
高清晰度、高幀數：高清晰度與高幀數同時實現。
可以廣泛應用于同時需要高清晰度和高幀數傳輸的領域。
KP-F500PCL/SCL
5.05 Megapixel
16
frame/second
KP-F230PCL/SCL
2.01 Megapixel
30
frame/second
KP-F200PCL/SCL
2.01 Megapixel
15
frame/second
KP-F80PCL/SCL
0.81 Megapixel
36
frame/second
KP-F31PCL/SCL
0.33 Megapixel
120
frame/second
KP-F39PCL/SCL
0.33 Megapixel
91
frame/second
KP-F30PCL/SCL
0.33 Megapixel
60
frame/second
KP-FB30PCL/SCL
0.33 Megapixel
60
frame/second
技術參數：
Model
KP-F500PCL
/SCL
KP-F230PCL
/SCL
KP-F31PCL
/SCL
KP-FB30PCL
/SCL
Imaging device
2/3-inch interline CCD
1/1.8-inch interline CCD
1/3-inch interline CCD
Total pixels
2536 (H) x 2068 (V)
1688 (H) x 1248 (V)
692 (H) x 504 (V)
Effective pixels
2456 (H) x 2058 (V)
1628 (H) x 1236 (V)
659 (H) x 494 (V)
Pixel size
3.45 µm (H) x 3.45 µm (V) (square lattice)
4.4 µm (H) x 4.4 µm (V) (square lattice)
7.4 µm (H) x 7.4 µm (V) (square lattice)
Sensing area
8.47 mm (H) x 7.10 mm (V)
7.16 mm (H) x 5.44 mm (V)
4.88 mm (H) x 3.66 mm (V)
Scanning system
Progressive
Aspect ratio
5:4
4:3
Frame rate
16 frames per second (full pixel readout)
30 frames per second (full pixel readout)
120 frames per second (full pixel readout)
60 frames per second (full pixel readout)
54 frames per second (vertical 2 pixel addition)
219 frames per second (vertical 2 pixel addition)
Sync system
Internal
Lens mount
C mount (Flange focal distance = 17.526 mm)
Special mount (Flange focal distance = 8.4 mm)
Resolution
Horizontal/Vertical: 2000TV lines
Horizontal / Vertical: 1200 TV lines
Horizontal: 500 TV lines / Vertical: 490 TV lines
Sensitivity
400 lx, F5.6, 3200 K
500 lx, F5.6, 3200 K
550 lx, F4, 3200 K
750 lx, F5.6, 3200 K
Minimum illumination
1.0 lx (F1.4, MAX GAIN, without IR cut filter)
3.9 lx (F1.4, MAX GAIN)
8.6 lx (F1.4, MAX GAIN)
5.9 lx, F1.4, MAX GAIN
Signal noise to ratio
48dB
45dB
50 dB
Gamma
γ = 1
Trigger input
CameraLink (CC1) or DCIN/SYNC connector
CameraLink (CC1) *When Reset control mode CC1 and CC2 are used
Partial scan
Selectable start position and height of picture grabbing in 1H step.
Power supply voltage
12 ± 1 VDC
External dimensions
44 (W) x 44 (H) x 41 (D) mm (Not including protrusions)
29 (W) x 29 (W) x 38 (D) mm (Not including protrusions)
Head: 12 (W) x 12.5 (H) x 47.5 (D) mm
CCU: 29 (W) x 29 (H) x 38 (D) mm
Mass
Approx. 110 g
Approx. 50 g
Head: Approx. 18 g
CCU: Approx. 50g (without cable) |
|
中國電子商務服務聯盟成員單位 瓊ICP備